This site has been deprecated in favor of https://attack.mitre.org and will remain in place until 11/1/22.

Difference between revisions of "Field Controller/RTU/PLC/IED"

From attackics
Jump to navigation Jump to search
(username removed)
m (edit summary removed)
(username removed)
m (edit summary removed)
 
Line 3: Line 3:
 
|Description=Controller terminology depends on the type of system they are associated with. They provide typical processing capabilities. Controllers, sometimes referred to as Remote Terminal Units (RTU) and Programmable Logic Controllers (PLC), are computerized control units that are typically rack or panel mounted with modular processing and interface cards. The units are collocated with the process equipment and interface through input and output modules to the various sensors and controlled devices. Most utilize a programmable logic-based application that provides scanning and writing of data to and from the IO interface modules and communicates with the control system network via various communications methods, including serial and network communications.[[CiteRef::References - ICS CERT definitions]]
 
|Description=Controller terminology depends on the type of system they are associated with. They provide typical processing capabilities. Controllers, sometimes referred to as Remote Terminal Units (RTU) and Programmable Logic Controllers (PLC), are computerized control units that are typically rack or panel mounted with modular processing and interface cards. The units are collocated with the process equipment and interface through input and output modules to the various sensors and controlled devices. Most utilize a programmable logic-based application that provides scanning and writing of data to and from the IO interface modules and communicates with the control system network via various communications methods, including serial and network communications.[[CiteRef::References - ICS CERT definitions]]
 
|Levels=Level 0, Level 1
 
|Levels=Level 0, Level 1
|Notes=Typically programmed in an IEC 61131 programming language, a PLC is designed for real time use in rugged, industrial environments. Connected to sensors and actuators, PLCs are categorized by the number and type of I/O ports they provide and by their I/O scan rate.[[CiteRef::ISA99]]
+
|Notes=Typically programmed in an IEC 61131 programming language, a PLC is designed for real time use in rugged, industrial environments. Connected to sensors and actuators, PLCs are categorized by the number and type of I/O ports they provide and by their I/O scan rate.[[CiteRef::Guidance - ISA99]]
  
 
An RTU is a special purpose field device that supports SCADA remote stations with both wired and wireless communication capabilities, in order to communicate with the supervisory controller. Wireless radio is leveraged in remote situations where wired communications are not available; typically with field equipment.  This role may also be fulfilled by PLCs with radio communication capabilities. The PLC may still be referred to as an RTU in this case.[[CiteRef::Guidance - NIST SP800-82]]
 
An RTU is a special purpose field device that supports SCADA remote stations with both wired and wireless communication capabilities, in order to communicate with the supervisory controller. Wireless radio is leveraged in remote situations where wired communications are not available; typically with field equipment.  This role may also be fulfilled by PLCs with radio communication capabilities. The PLC may still be referred to as an RTU in this case.[[CiteRef::Guidance - NIST SP800-82]]
 
}}
 
}}

Latest revision as of 16:35, 21 October 2019

Description

Controller terminology depends on the type of system they are associated with. They provide typical processing capabilities. Controllers, sometimes referred to as Remote Terminal Units (RTU) and Programmable Logic Controllers (PLC), are computerized control units that are typically rack or panel mounted with modular processing and interface cards. The units are collocated with the process equipment and interface through input and output modules to the various sensors and controlled devices. Most utilize a programmable logic-based application that provides scanning and writing of data to and from the IO interface modules and communicates with the control system network via various communications methods, including serial and network communications.1

Levels

Notes

Typically programmed in an IEC 61131 programming language, a PLC is designed for real time use in rugged, industrial environments. Connected to sensors and actuators, PLCs are categorized by the number and type of I/O ports they provide and by their I/O scan rate.2

An RTU is a special purpose field device that supports SCADA remote stations with both wired and wireless communication capabilities, in order to communicate with the supervisory controller. Wireless radio is leveraged in remote situations where wired communications are not available; typically with field equipment. This role may also be fulfilled by PLCs with radio communication capabilities. The PLC may still be referred to as an RTU in this case.3

Techniques That Apply